CO2 Laser Engraving Systems
Introducing the next generation in CO2 laser engraving systems... Gravograph
three CO2 laser engraving systems have with a working range
of 12" x 12", 24" x 12", and 24" x 24",
as well as a maximum speed of 79 in/s - precision movement by linear
guides and laser powers of 10-20-40-60-80 watts to suit all types of
work. For small applications,our tabletop laser engraving systems produce
name tags, plaques, trophy plates, and small signage. If your applications
are more robust, our large laser floor units handle heavy-duty laser
cutting, wood marking, high-volume rubber stamps, signage, and high-volume
matrix marking applications.
The Gravograph commitment to exceptional
products and services is evident in our laser engraving systems and
engraving software. Exceptional features found on all our laser engraving
systems that set us apart include:
Construction
- The laser system is fabricated from sheet metal instead of molded
plastic.
- Gantry is assembled with heavy duty bearings, wider belts and powerful
micro-stepping motors.
- Z-Axis table assembly is fitted with fourindustrial-grade, lead
screws that move the table vertically. This extra power allows up
to 50lbs to be indexed and retained during lasering.
- The chassis is a welded structure, and though it is a bit heavier
than some, it reduces vibration during processing. This is especially
obvious when it is mounted on one of our bases.
Ergonomics and Safety
- Easy-operating, lightweight top door is easy to open and allows
front loading and complete access to the engraving area. The access
to the working area is much better as compared to the traditional
top-loaded configurations.
- Air flow is very consistent in the cabinet and greatly lowers the
fumes in the cabinet.
- When the LS800/LS900 are mounted on their bases, the work height
is around 40", which is in the range recommended by most ergonomic
guides.
Part Size
- The LS laser engraving systems are designed around standard
1/4 sheets, 1/2 sheets, and full sheets of engraving material.
In addition, the LS100, LS800, and LS900 laser
engravers have the longest Z-axis stroke in the industry.
- The extra Z-axis height allows parts almost 10" tall to be
processed.
- Using stock engraving material sizes helps minimize waste.
- Larger diameter parts can be processed by the cylindrical attachment
due to our longer Z-axis stroke.
Ease of Maintenance
- The LS laser engraving systems are designed to be maintenance friendly,
allowing quick troubleshooting to keep you running 24/7.
- The fold optics are exposed for easy cleaning.
- The optical lens is easily removed via a quick release screw that
locates itself when re-installed.
- The exhaust is "hard plumbed" and thus it is less likely
to clog and easier to clean.
- The interior of the cabinet is very accessible for cleaning.
- The Z-axis table leveling hardware can be simply adjusted.
- The laser tube can be removed with little effort and tube realignment
is easy due to the mounting hardware.
- The electronics can be worked on, without the need for removing
the rack.
- The firmware control panel has simple maintenance functions built-in
that are controlled by the function keys.
- The Y-axis motor is centered on the spindle and is easily replaced.
This also helps with stability in this axis.
- The side panels are removable, so the watt meter is easily introduced
into the beam path.
- The fans are positioned on the sides of the cabinet and the filters
are easy to replace, allowing the system to be located close to a
wall, without the need for extra air space around the laser engraving
system.
|
Accessories
Alternate Focal Length Options
Air
Compressor for Air Assist
Honeycomb
Cutting Table
Pin
Cutting Table
Cylindrical
Attachment - LS800 and LS900
Tilt Table
for Cylindrical Attachment (LS800 & LS900)
Integrated
Exhaust Module
Expertise
and Advice
Gravograph supports its customers through installation
training, 800-line technicians, i-Help, our interactive web tool,
and factory trained field engineers. For additional training,
we've created Engraver's Academy for those who need classes
or would like to develop extra skills. Learn more in our Support
Section.
 The LS serie Laser systems are the ideal solutions for marking permanent Unique Identification (UID) bar codes and 2D DataMatrix codes directly on part or to a non-removable tag.
If you want to know more about specific guidance related to UID requirements:
Click here to find more information |
|
