Sign Holders and Plate Bases
A. Standard Plate Holder
Single plate holder for 2" wide plates
| With 1/16" slots |
| Size |
Gold |
Silver |
Satin Silver |
| 8" |
30077 |
30076 |
34882 |
| 10" |
34820 |
19479 |
|
| With 1/8" slots |
| 8" |
34820 |
34875 |
|
| 10" |
34822 |
34876 |
|
B. Slimline Plate Holder
1" x 7" holder designed for 1/16" insert
Gold 30076 Silver 30072
C. Two-Sided Plate Holder
1 1/4" x 6" holder designed for 1/4" insert
Gold 30075 Silver 30074
D. Pedestal Plate Holder
A contoured base elevates the engraved 1/16" insert in this 1 1/2" x 9" holder. Insert not included.
Gold 34823 Silver 34877
Black 34995
E. Plate Stand
A slim base for 1/16" insert.
Insert not included.
| Length |
Gold |
Silver |
| 8" |
19474 |
19480 |
| 10" |
34825 |
34880 |
F. The Executive™
2" x 8" nameplate slides into 1/16" slotted front surface. Name plate not included. Rear compartment holds business cards. Features pencil through and two pen holders with pens. Gift boxed.
Gold 34842 Silver 34900
G. Two-line Plate Holder
Two sections holds a 2" x 9" insert - bottom a 1 1/2" x 9" insert. Holder is designed for 1/16" inserts. Inserts not included.
Gold 34824
|
|
H. Wall Bracket
Mount signs perpendicular to the wall. Slotted for 1/8" insert. Cap nuts and screws included.
| Height |
Gold |
Silver |
| 2" |
30070 |
19486 |
| 34827 |
34883 |
721-603 |
| 4" |
30071 |
19487 |
| 5" |
34828 |
34884 |
J. Standard Wall Plate Holder
for 2" x 8" or 2" x 10" insert. 26" lengths have natural aluminum exposed edges which can be polished. 5/32" hole. No holes in 26" lengths. (Not shown)
| With 1/16" slots |
| Size |
Gold |
Silver |
| 8" |
19485 |
19476 |
| 10" |
30069 |
30068 |
| 26" |
34837 |
34891 |
| With 1/8" slots |
| 8" |
34838 |
34892 |
| 10" |
34839 |
34893 |
|
K. Utility Wall Plate Holder
Available in several pre-cut lengths or 26" lengths to cut to specific sizes. Slotted for 1/16" insert. Natural aluminum, nonfinished edges. For mounting use double-faced tape or drill holes. (Not shown)
| For 3/4" wide Name Plates |
| Length |
Gold |
Silver |
| 26" |
34829 |
34885 |
| For 1" wide Name Plates |
| 4" |
19475 |
19482 |
| 6" |
30067 |
30066 |
| 8" |
34830 |
19483 |
| 10" |
34831 |
34886 |
| 26" |
34832 |
34887 |
| For 1 1/2" wide Name Plates |
| 8" |
34833 |
34888 |
| 9" |
34834 |
34889 |
| 10" |
34835 |
|
| 26" |
34836 |
34890 |
|
L. Multiple Insert Wall Plate Holder
25" length designed for 1/16" inserts of any width. Center strip holds plates between the outside frame strips. Attach to wall surface with double-faced tape. Natural aluminum, nonfinished edges.
| |
Gold |
Silver |
| Frame Strip |
34840 |
34894 |
| Center Strip |
34841 |
34895 |
M. Counter Sign Holder
Display instructions, menus or staff names with this 10" long holder designed for larger signs up to 12" high. Slotted for 1/8" materials. Available in gold and silver finish.
Gold 34826 Silver 34881
N. Plate Bases
Accommodate 1/16" insert. 1/8" slots can be special ordered. Insert not included.
| |
Gold |
Black |
Clear |
| Size |
Walnut |
Acrylic |
Acrylic |
| 6" |
35358 |
35065 |
35235 |
| 8" |
35359 |
35066 |
35236 |
| 10" |
35360 |
35067 |
35237 |
|
P. Six-Line Plastic Directory
Extruded white opaque plastic. Available in lengths up to 50" as a special order. For more than 6 lines, stack two or more units. Designed for 1/16" inserts. Mount with
double-faced tape. Inserts not included.
1 x 7" 35482 1 x 24" 35483
Q. Deluxe Directories
Anodized Aluminum frames with satin silver finish. Removable holder is easily inserted into the backplate/frame and held with a set screw. Two concealed counter sunk holes in the backplate can be used to screw the holder to the wall or use double faced tape. Inserts not included.
Header Plus One Insert Line
(Not shown)
Directory Size: 2 3/16" x 7 3/16"
Plate Sizes:
Header - 1 1/4" x 7" x 1/16"
Insert - 3/4" x 7" x 1/16"
Part No. 34910
Header Plus Three Insert Lines
Directory Size: 3 7/8" x 7 3/16"
Plate Sizes:
Header - 1 1/4" x 7" x 1/16"
Inserts - 3/4" x 7" x 1/16"
Part No. 34911
|
Header Plus Six Insert Lines 2-Part insert (Not shown)
Directory Size: 6 1/4" x 7 3/16"
Plate Sizes:
Header - 1 1/4" x 7" x 1/16"
Inserts - 3/4" x 7" x 1/16"
Part No. 34912
Directory Extender
6-line addition can be used with any Deluxe Directory unit. Includes backplates and two three-lineholders. (Not shown)
Extender Size: 5" x 7 3/16"
Plate Sizes:
Inserts - 3/4" x 7" x 1/16"
Part No. 34913
R. Lawn and Garden Stakes
Anodized Aluminum stakes. We recommend 2-Plex material for exterior signage. Inserts on 9" x 1/2" must be at least 3" wide, top to bottom, since mounting holes in stakes are 2 3/4" center to center, 5/32" diameter. Nuts and screws included. Sign insert not included.
9" x 1/2" 15" x 1"
Part No. 34896 34899
S. Auto License Plate Holders.
Car frame measures 6 1/4" x 12 1/4" overall, strip size" top - 11/16" x 6 1/4" bottom - 15/16" x 10 1/4." Inserts not included:
Color
Chromed 36120
Matte Black 35785
Gold 35971 |
